Hi All, I couldn’t find the exact steps here or on the SG website, so I’m going to ask: What are the steps to connect a RPi3 sensorgnome to the internet via an ethernet cable for automatic data upload and remote access? I have this capability at a few sites and want to get this up and running. Tha…

Hi Todd, I couldn't find the exact steps here or on the SG website, so I'm going to ask: What are the steps to connect a RPi3 sensorgnome to the internet via an ethernet cable for automatic data upload and remote access? I have this capability at a few sites and want to get this up and runnin…

Sounds great with the automatic data sync! Very much looking forward to that, it will save us a lot of field time/money… Thanks again… Thomas

Hi John, could it be that the “realtime” page doesn’t work? https://live.sensorgnome.org/ gives a “forbidden”- message… René

Hi René, could it be that the "realtime" page doesn't work? https://live.sensorgnome.org/ gives a "forbidden"- message... You can't connect directly via "live.sensorgnome.org". You have to use: https://sensorgnome.org/Internal_pages/Realtime_Sensorgnome_Status then click on the serial numbe…

Hi John, I was just wondering… will this download all the data present on a connected sensorgnome? or only from the time this is implemented? Regards, Thomas

Hi Thomas, Hi John, I was just wondering.. will this download all the data present on a connected sensorgnome? or only from the time this is implemented? Remote sync grabs all data from the connected SG which are not already on the server. John

I am setting up a new MOTUS tower and would like to have it do automatic uploads. Is this working? I am working with an existing motus project (PARC or Powdermill Avian Research Center), should I make the request for credentials through them?

Hi Patrick I am setting up a new MOTUS tower and would like to have it do automatic uploads. Is this working? I am working with an existing motus project (PARC or Powdermill Avian Research Center), should I make the request for credentials through them? Yes, automatic sync is working now. You…

Hi all, Are automatic uploads (sync) possible if we have wi-fi capabilities in our sensorgnome and it is located in a building with wireless signal? Or is an ethernet cable the only way to set up automatic downloads? (Note: I am unable to access my sensorgnome’s wifi unless I turn off the building…

If your sensorgnome is a raspberry pi. A change in network.txt will do the trick. (located on you SG), check the info here: https://public.sensorgnome.org/Raspberry_Pi_Sensorgnome/network.txt Its also explained in the network.txt file. My @home SG is connected through WIFI and uploading to motus…

The Motus Community

Raspberry Pi 3 ethernet conection for automatic upload

Stations Receivers

connectivity

afficher la publication dans le sujet

Accueil
Catégories
Lignes directrices
Conditions générales d'utilisation
Politique de confidentialité

Optimisé par Discourse, le rendu est meilleur quand JavaScript est activé.